Hot Water High Pressure Washer

The durable cold-hot-steam high-pressure washer incorporates a water-cooled electric motor as well as Karcher's +90% fuel efficient burner system. The HDS 1055 features complete machine shut-off at the trigger gun, variable water volume, operating pressure, temperature control and chemical metering. This direct drive unit is ideal for use in transportation and construction industries.

 

Model No.	psi	gpm	Voltage	Phase	HP	Amps	Max. Water Supply Temp.	Weight	Dimensions (LxWxH)	Nozzle Diameter
HDS 1055	450-3000	2.0-3.5	220	1	9.5	30	285°F/175°F	300 lbs.	51 x 28 x 33 in.	.040

 Features and Benefits:

Drive Unit

• Endurance tested motor with double safety circuit (double thermal overload protection)
• Direct drive from one motor shaft of high pressure pump, fan for the combustion air and fuel pump
• Strong drive with double overload protection, automatic shut-off machine
• Compact construction, maximum use of performance, less prone to fault

High-Pressure Pump

• Three piston pump (axial), high-grade hardened steel pistons, swash plate drive.
• Brass cylinder head with integrated variable pressure and water flow control.
• Hydro-dynamic lubrication of the high Pressure seals.
• Direct drive, minimum of moving parts, outstanding efficiency, smooth and quiet operation.
• Long service life, resistant to detergents, adjustments to all cleaning jobs, steam stage.
• Increased service life.

Boiler and Burner System

• Compact burner, vertical heating coil and permanent ignintion, heating capacity 51kw/45.000kcal
• Even heat distiribution, no corrosion due to condensation, emissions are signigicantly lower than statutory values.

Safety and Control Equipment

• Pressure switch control
• Low water cut-out
• Safety valve
• 24V control voltage
• Control lamps display for: motor protection, low fuel protection, scale inhibitor level
• CSA certfication
• Machine stops when gun is closed, superior service life of pipe.
• Automatic switch-off of burner when water supply is low, protects against over-heating.
• Protects from over pressure
• Exemplary operator protection
• Fault indication at a glance
• Utmost safety and quality standards

Miscellaneous

• Large wheels recessed in the chassis
• Hinged hood made of high-impact plastic fully enclosing machine
• "Monocoque chassis", galvanized, phosphatized and powder coated.
• Integrated brackets and support for spray lance, power cable and high-pressure hose
• Scale inhibitor (DGT) with level indicator
• Float tank
• Pivotable lance
• Infinitely variable detergent metering
• Good manoeuvrability on all ground, no projection
• Protection from dirt, water and damage
• No weld seams and sharp edges, superior protection against rust, long service life
• Keeps everything in place and always ready to use
• Prevents scale deposits
• Seperation from fresh water supply for back flow prevention.
• Easy access to difficult to clean areas
• Metering range:0-9 gph