Series: 2SE
4/10 hp

Barnes
Medium Head - Heavy Duty Submersible Sewage Pumps

* Single phase units are available with piggy-back wide angle float for automatic operation.
* Single Seal with Secondary Exclusion Seal.

Pump Specifications
Sizes:	2" NPT vertical discharge.
Motor Housing:	Cast iron, Class 30
Pump Body:	Cast iron - Class 30
Impeller:	2 vane open, cast iron with pressure vanes on back side. Zytel - Glass filled.
Seal:	Mechanical type in oil-filled chamber with secondary exclusion seal, ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Hardware:	Stainless steel.
Suitable for:	104°F (40°C) liquids.
Standard Equipment:	All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug-in terminal plate. Single phase size 14/3 type "SJOW". Three phase size 14/4 type "SOW".

 

Motor Specifications
Single Phase	PSC (Permanent Split Capacitor) completely oil-filled with overload protection in motor.
Three Phase:	Completely oil-filled. Protection required in magnetic starter.
Motor Speed:	3450 rpm
Insulation:	Class-B
Shaft:	Stainless Steel.
Thrust Bearing:	Ball, oil lubricated.
Radial Bearing	Ball, oil lubricated.
Electrical Ratings:	115V - 1ph 230V - 1ph 208V - 3ph 230V - 3ph 460V - 3ph 575V - 3ph 4/10 hp 10.5A ½ hp 5.5A ½ hp 3.3A ½ hp 3.0A ½ hp 1.7A ½ hp 1.4A ½ hp 11.5A 1.0 hp 10.5A 1.0hp 6.0A 1.0hp 5.5A 1.0hp 2.7A 1.0hp 2.2A

Models may not be exactly as illustrated

Back to Sewage Pumps