Series: EH

Barnes
Deluxe All Cast Iron Submersible Sump & Effluent Pumps

* Ideal for the removal of waste water where higher discharge head is required.
* Suitable for sump depth of 20" (508mm) or deeper with a minimum daimeter of 18" (457mm).

Model No.	Discharge NPT	hp	115	ph	Amps
EH-25	1 1/2"	1/4	115	1	10.5
2EH-314L	2"	1/3	115	1	6.5

Pump Specifications
Pump Body:	Cast iron - Class 30
Motor Housing:	Cast iron, Class 30
Impeller	EH: 2 vanes, cast iron with presure vanes on backside.
Hardware:	300 series stainless steel.
Shaft Seal:	Mechanical type with ceramic & carbon faces, stainless steel spring & Buna-N elastomer.
Power Cord:	20' (6m) type "SJTW" size 14/3 with molded plug - grounded.
Automatic Operation:	A=Wide angle mechanical float (EH25A) VF=Adjustable vertical float switch (EH25VF)

 

Motor Specifications
Motor:	Oil-filled with automatic thermal protection.
Insulation:	Class-B
Motor Speed:	1750 rpm
Shaft:	1/2" diameter. Stainless steel.
Thrust Bearing:	Ball, oil lubricated.
Radial Bearing:	2EH314L - Ball , EH-25 - Sleeve

Models may not be exactly as illustrated.

Back to Sewage Pumps